8 User’s Guide
[10] Telephone Line Monitoring Failure
With button [10] illuminated, the presence of a telephone
line has not been detected for more than 30 seconds.
[
STAY] Fire Zone Trouble
When the [
STAY] button illuminates, a wiring problem on
the fire zone is occurring.
[
BYP] Module Loss
When a module is no longer communicating with your
system, the [BYP] button illuminates.
[
MEM] Wireless Transmitter Supervision Loss
When a wireless transmitter is no longer communicating
with its receiver or its batteries are disconnected, [
MEM]
illuminates.
.
2.5.1 Keypad Fault [FORCE]
If your keypad is no longer communicating with your alarm
system, the keypad will emit four consecutive beeps at 3-
second intervals. Press any button on the keypad to
terminate the “beeping” sequence. The [
TBL] button will
flash and the [FORCE] button will illuminate. When
communication has been restored, the keypad will resume
its functions.
To view on which zones the Wireless Transmitters are
experiencing trouble, press the [
MEM] button after step 2
of How do I access the Trouble Display? on page 5. Also
see Zone Display on page 4.
To Next Page
Loading...
