18 Chapter 5: System Configuration
Registering the IPR512 Receiver
After logging into the IPR512 Receiver Account Management System for the first time, you will
need to register your IPR512 Receiver in order to activate a fully-functional version. By default,
the IPR512 Receiver runs in Demo Mode. When in Demo Mode you are limited to 10 accounts
and the communication port COM1 is disabled.
To Register the Unit
1. Connect the LAN of the IPR512 Receiver to a router on a network with access to the Inter-
net.
2. Click Register.
Figure 17: Demo Mode
To Next Page
Loading...
