Paradox IPR512 User Manual

6 Chapter 2: Overview
Paradox Product Compatibility
The IPR512 Receiver is compatible with the following Paradox security products:
• IP100 V1.50 or higher
• PCS100 GPRS Module V1.60 or higher
• EVO48 and EVO192 V2.02 or higher with K641/K641R keypads V1.51 or higher
• Spectra SP Series V3.42 or higher with K32LCD keypads V1.22 or higher
• Esprit E65 V2.10 or higher
Software Compatibility
Monitoring station automation software that support Radionics 6500, Ademco 685, and Sur-
Gard MLR2-DG receiver data formats are supported by the IPR512 Receiver interface. The
IPR512 Receiver interface is compatible with most automation softwares on the market such
as:
•SIS
• SIMS II
•MAXIMUS
•WINSAMM
IPR512 Receiver System Defaults
The following table provides a listing of all factory shipped default settings for the IPR512
Receiver. For more information on configuring the default settings, refer to “Chapter 6: IPR512
Receiver LCD System Configuration” on page 42.
Table 1: IPR512 System Defaults
The IPR512 Receiver’s default settings can be re-configured through the IPR512 Receiver
Account Management System. For more information on how to configure these settings, refer to
“Chapter 5: System Configuration” on page 16.
LAN WAN1 WAN2
IP Address 192.168.1.250 192.168.1.251 192.168.1.252
Port 80 Transmission Control
Protocol (TCP)
16000 User Datagram
Protocol (UDP)
16001 (UDP)
Subnet Mask 255.255.255.0 255.255.255.0 255.255.255.0
Gateway 192.168.1.1 192.168.1.1 192.168.1.1
DSN Primary 192.168.1.1 192.168.1.1 192.168.1.1
DSN Secondary 192.168.1.1 192.168.1.1 192.168.1.1

Paradox IPR512 Specifications

General

Brand	Paradox
Model	IPR512
Category	Receiver
Language	English