32 Chapter 5: System Configuration
Polling web site Defines the website address to be polled by the IPR512 Receiver to ensure
Internet connection. If no connection is established, a trouble will be set on the
LCD, reporting a WAN Internet connection failure.
Date and Time
NTP server Defines the NTP server used for clock synchronization.
Time Zone Defines the time zone used at the location of the IPR512 Receiver. It is important
to select the proper time zone to ensure date and times are properly reflected in
the IPR512 Receiver Account Management System.
Manual Defines whether date and time information will be configured manually. If
configuring the date and time manually, define the month (MM), day (DD), year
(YYYY), and time HH:MM (24-hour time format) to ensure that date and times are
properly reflected in the IPR512 Receiver Account Management System.
Daylight savings time Defines when the daylight saving time occurs.
To Configure Daylight Savings Time
1. Define the start date of DST (Day: DD and Month: MM).
2. Define the end date of DST Day: DD and Month: MM).
3. Define the day of the week that DST occurs (Monday - Sunday). DST will occur the
day of the week defined after the start date set in Step 1.
4. Define the time of day that DST occurs (HH:MM).
Note: Although the date is different each year, you only need to set the start and end date
and times once for DST to take effect.
5 - Save all changes
Save Updates and saves all the changes implemented in the Receiver Configuration
menu.
Item Description
To Next Page
Loading...
Need help?
General
