Paradox Magellan MG5050 EN - Page 41

Magellan / Spectra SP 37
Option [6] OFF = Repeat Wireless Zone 14 Signals (default)
Option [6] ON = Repeat Wireless Zone 14 Signals
Option [7] OFF = Repeat Wireless Zone 15 Signals (default)
Option [7] ON = Repeat Wireless Zone 15 Signals
Option [8] OFF = Repeat Wireless Zone 16 Signals (default)
Option [8] ON = Repeat Wireless Zone 16 Signals
Section [554] (Repeater 1) and Section [564] (Repeater 2): Wireless Repeater Options
Enable or disable the repetition of zone signals in these sections. Enabling these options for zones means that the repeater will
retransmit any signals relevant to them.
Option [1] OFF = Repeat Wireless Zone 17 Signals (default)
Option [1] ON = Repeat Wireless Zone 17 Signals
Option [2] OFF = Repeat Wireless Zone 18 Signals (default)
Option [2] ON = Repeat Wireless Zone 18 Signals
Option [3] OFF = Repeat Wireless Zone 19 Signals (default)
Option [3] ON = Repeat Wireless Zone 19 Signals
Option [4] OFF = Repeat Wireless Zone 20 Signals (default)
Option [4] ON = Repeat Wireless Zone 20 Signals
Option [5] OFF = Repeat Wireless Zone 21 Signals (default)
Option [5] ON = Repeat Wireless Zone 13 Signals
Option [6] OFF = Repeat Wireless Zone 22 Signals (default)
Option [6] ON = Repeat Wireless Zone 22 Signals
Option [7] OFF = Repeat Wireless Zone 23 Signals (default)
Option [7] ON = Repeat Wireless Zone 23 Signals
Option [8] OFF = Repeat Wireless Zone 24 Signals (default)
Option [8] ON = Repeat Wireless Zone 24 Signals
Section [555] (Repeater 1) and Section [565] (Repeater 2): Wireless Repeater Options
Enable or disable the repetition of zone signals in these sections. Enabling these options for zones means that the repeater will
retransmit any signals relevant to them.
Option [1] OFF = Repeat Wireless Zone 25 Signals (default)
Option [1] ON = Repeat Wireless Zone 25 Signals
Option [2] OFF = Repeat Wireless Zone 26 Signals (default)
Option [2] ON = Repeat Wireless Zone 26 Signals
Option [3] OFF = Repeat Wireless Zone 27 Signals (default)
Option [3]
ON = Repeat Wireless Zone 27 Signals
Option [4] OFF = Repeat Wireless Zone 28 Signals (default)
Option [4] ON = Repeat Wireless Zone 28 Signals
Option [5] OFF = Repeat Wireless Zone 29 Signals (default)
Option [5] ON = Repeat Wireless Zone 29 Signals
Option [6] OFF = Repeat Wireless Zone 30 Signals (default)
Option [6] ON = Repeat Wireless Zone 30 Signals
Option [7] OFF = Repeat Wireless Zone 31 Signals (default)
Option [7] ON = Repeat Wireless Zone 31 Signals
Option [8] OFF = Repeat Wireless Zone 32 Signals (default)
Option [8] ON = Repeat Wireless Zone 32 Signals