Paradox Magellan MG5050 EN User Manual

38 Reference & Installation Manual
Section [556] (Repeater 1) and Section [566] (Repeater 2): Wireless Repeater Options
Enable or disable the repetition of 2WPGM signals in these sections. Enabling these options for 2WPGMs means that the
repeater will retransmit any signals relevant to them.
Option [1] OFF = Repeat Wireless 2-Way PGM 1 Signals (default)
Option [1] ON = Repeat Wireless 2-Way PGM 1 Signals
Option [2] OFF = Repeat Wireless 2-Way PGM 2 Signals (default)
Option [2] ON = Repeat Wireless 2-Way PGM 2 Signals
Option [3] OFF = Repeat Wireless 2-Way PGM 3 Signals (default)
Option [3] ON = Repeat Wireless 2-Way PGM 3 Signals
Option [4] OFF = Repeat Wireless 2-Way PGM 4 Signals (default)
Option [4] ON = Repeat Wireless 2-Way PGM 4 Signals
Option [5] OFF = Repeat Wireless 2-Way PGM 5 Signals (default)
Option [5] ON = Repeat Wireless 2-Way PGM 5 Signals
Option [6] OFF = Repeat Wireless 2-Way PGM 6 Signals (default)
Option [6] ON = Repeat Wireless 2-Way PGM 6 Signals
Option [7] OFF = Repeat Wireless 2-Way PGM 7 Signals (default)
Option [7] ON = Repeat Wireless 2-Way PGM 7 Signals
Option [8] OFF = Repeat Wireless 2-Way PGM 8 Signals (default)
Option [8] ON = Repeat Wireless 2-Way PGM 8 Signals
Section [557] (Repeater 1) and Section [567] (Repeater 2): Wireless Repeater Options
Enable or disable the repetition of 2WPGM signals in these sections. Enabling these options for 2WPGMs means that the
repeater will retransmit any signals relevant to them.
Option [1] OFF = Repeat Wireless 2-Way PGM 9 Signals (default)
Option [1] ON = Repeat Wireless 2-Way PGM 9 Signals
Option [2] OFF = Repeat Wireless 2-Way PGM 10 Signals (default)
Option [2] ON = Repeat Wireless 2-Way PGM 10 Signals
Option [3] OFF = Repeat Wireless 2-Way PGM 11 Signals (default)
Option [3] ON = Repeat Wireless 2-Way PGM 11 Signals
Option [4] OFF = Repeat Wireless 2-Way PGM 12 Signals (default)
Option [4] ON = Repeat Wireless 2-Way PGM 12 Signals
Option [5] OFF = Repeat Wireless 2-Way PGM 13 Signals (default)
Option [5] ON = Repeat Wireless 2-Way PGM 13 Signals
Option [6] OFF = Repeat Wireless 2-Way PGM 14 Signals (default)
Option [6] ON = Repeat Wireless 2-Way PGM 14 Signals
Option
[7] OFF = Repeat Wireless 2-Way PGM 15 Signals (default)
Option [7] ON = Repeat Wireless 2-Way PGM 15 Signals
Option [8] OFF = Repeat Wireless 2-Way PGM 16 Signals (default)
Option [8] ON = Repeat Wireless 2-Way PGM 16 Signals

Paradox Magellan MG5050 EN Specifications

General

Partitions	2
Wireless Zones	32
User Codes	32
Event Buffer	256
Remote Control	Yes
Wireless Keypads	Supported
StayD Mode	Yes
RF Frequency	433 MHz or 868 MHz
Users	32
Compatibility	Paradox wireless devices
Communication	GSM, IP
Type	Control Panel
Power Supply	16.5 VAC
Battery Backup	12 VDC, 7 Ah
Operating Temperature	0°C to 50°C
Humidity	5% to 90% non-condensing
Zones	32 (8 on-board)