2-6 Product Overview
DC590+ DRV Series DC Digital Drive
Model Number (Europe)
Block No. Variable Description
5 XX Two characters specifying the user interface language:
UK = English
FR = French
GR = German *
SP = Spanish *
IT = Italian *
* refer to Customer Services
6 XXX Up to three characters specifying the feedback option (one must be fitted):
ARM = Armature Voltage
AN = Analog Tacho
ENW = Encoder (wire-ended)
ENP = Encoder (plastic fibre-optic)
ENG = Encoder (glass fibre-optic)
7 XXXXX Up to five characters specifying the protocol for the 6055 communications Tech Box option:
0 = No Comms option fitted
EI00 = RS485 (EI BINARY, EI ACSII or MODBUS RTU)
PROF = PROFIBUS DP
LINK = LINK
DNET = DEVICENET
CAN = CANOPEN
MBP = MODBUS+
ENET = ETHERNET
8 XXX Up to three characters specifying the auxiliary mains power supply for contactor (all units):
110 = 110(±10%) 50/60Hz
230 = 220V to 240V (±10%) 50/60Hz
CX = Control transformer fitted internally
9 XXX Motor blower output:
0 = Not fitted
016 = 0.10 to 0.16A
025 = 0.16 to 0.25A
040 = 0.25 to 0.40A
063 = 0.40 to 0.63A
100 = 0.63 to 1.00A
160 = 1.00 to 1.60A
250 = 1.60 to 2.50A
400 = 2.50 to 4.00A
630 = 4.0A to 6.30A
10 XXX Auxiliary volt-free contact:
AUX = Fitted
11 XXX Up to three characters specifying engineering special options:
0 = No special option
To Next Page
Loading...
