Parker 590+ DRV - Repairs for Frame 7

Routine Maintenance and Repair 8-11
DC590+ DRV Series DC Digital Drive
Repairs for Frame 7
Fuse Replacement (Frame 7)
1. Remove the front cover.
2. Unplug the ribbon cables to the trigger boards.
3. Open the swing-frame using the two quick-release fixings at the right hand end.
590+ 4Q Product (Regenerative)
Upper Phase Assembly
Lower Phase Assembly
Current
Transformer
AC Incoming
Busbar
Fuse
Phase Assembly
Connection Screws
Screw
A
B
C
D
E
Handles
FRONT VIEW SIDE VIEW
Phase Assembly
Connection Screws
Fuse
FG
HI
CT Plate
Figure 8-1 590+ (Frame 7) Fuse Replacement Diagram