Parker 590+ DRV - MMI Menu Maps

Programming D-5
DC590+ DRV Series DC Digital Drive
MMI Menu Maps
The function block descriptions include an easy-find menu showing the menu levels and titles encountered to find the
appropriate menu title, and the parameters contained in the menu(s).
The Menu Maps are shown as if the view level is STANDARD.
Where there is more than one sub-menu, i.e. ANALOG INPUTS as illustrated, the parameters shown will be for the last sub-
menu. In many cases, these parameters will reflect the name and number of the last sub-menu.
MMI parameters are named intuitively to make the keypad easier to use, however, they may vary slightly from function
block names.
A function block may contain parameters that are contained within more than one MMI menu, for example FIELD CONTROL. In this case, the extra
menus are indicated by >> in the MMI Menu Map.
MM
I
Menu Ma
p
1
SYSTEM
2
CONFIGURE I/O
3
ANALOG INPUTS
4
ANIN 1 (A2)
4
ANIN 5 (A6)
CALIBRATION
MAX VALUE
MIN VALUE
DESTINATION TAG