Operating / Mounting instruction
2 192-550003N10 ETH ATEX December 2019
____________________________
Production site:
Parker Hannifin Manufacturing Germany GmbH & Co. KG
Electromechanical & Drives Division Europe [EMDE]
Robert-Bosch-Strasse 22
77656 Offenburg, Deutschland)
Tel.: + 49 (0781) 509-0
fax + 49 (0781) 509-98176
Internet: www.parker.com/eme http://www.parker.com/eme
Email address: sales.automation@parker.com mailto:EM-Motion@parker.com
Parker Hannifin GmbH - registered office: Bielefeld HRB 35489
Management Board: Ellen Raahede Secher, Dr.-Ing. Hans-Jürgen Haas, Kees Veraart - Chairman of the board: Hansgeorg Greuner
Italy:
Parker Hannifin Manufacturing Srl
Electromechanical & Drives Division [EME]
Via C. Gounod, 1
20092 Cinisello Balsamo (Milano), Italy
Phone: + 39 (0)2 361081
Fax: + 39 (0)2 36108400
Internet: www.parker.com/eme http://www.parker.com/eme
E-mail: parker.italy@parker.com mailto:parker.italy@parker.com
Non-warranty clause
We checked the contents of this publication for compliance with the associated
hardware and software. We can, however, not exclude discrepancies and do
therefore not accept any liability for the exact compliance. The information in this
publication is regularly checked, necessary corrections will be part of the
subsequent publications.
German Master created.
Additional/ current information:
Our product on the internet: http://solutions.parker.com/eth_support
About this manual
This manual contains notes and safety instructions, information about
commissioning, service and maintenance.
For information on project development (technical data, dimensions, accessories,
options, dimensioning aids and order code) please refer to ETH catalogue.
To Next Page
Loading...
Need help?
General
