Terms of guarantee / warranty
192-550003N10 ETH ATEX December 2019 21
1.11 Terms of guarantee / warranty
These operating instructions are subject to changes including changes in technical
details with respect to the information and Figures contained herein.
Parker Hannifin Manufacturing Germany GmbH & Co. KG grants no quality or
durability guarantees nor any guarantees as to the suitability for specific purposes.
Such guarantees must be expressly agreed upon in writing
Public statements, recommendations or advertising do not in any way represent
quality specifications.
The warranty rights of the user imply that he reports any fault immediately and
describes it precisely in his notice of defects. Parker Hannifin Manufacturing
Germany GmbH & Co. KG is not responsible under any circumstances for damage
to the product itself or any consequential damage caused by the product resulting
from improper handling of the product. If Parker-Hannifin Manufacturing Germany
GmbH & Co. KG is responsible for a defect, Parker-Hannifin Manufacturing
Germany GmbH & Co. KG shall be authorized, at its discretion, to undertake
improvements or deliver replacements.
In compliance with ISO 9000, all products are equipped with a type plate and a
note of care that are bound to the device. The type plate must not be removed or
damaged under any circumstances.
Parker Hannifin Manufacturing Germany GmbH & Co. KG shall not be held liable,
regardless of any legal basis, except for cases of intent or gross negligence;
injuries to life, body or health; or defects of malicious nondisclosure or whose
absence was expressly guaranteed in writing.
Furthermore, if there is compulsory liability under the Product Liability legislation for
personal injury and property damage to privately used objects, in the event of
negligent breach of significant contractual obligations, Parker Hannifin
Manufacturing Germany GmbH & Co. KG shall also be liable for cases of ordinary
negligence; however, this is limited to damages that are contractually typical and
foreseeable.
Further claims are hereby excluded.
The warranty shall lapse in the event of non-compliance with these operating
instructions, the relevant statutory provisions and other information provided by the
supplier.
In particular, we are not responsible for failures caused by modifications made by
the customer or other parties. In such cases, the normal repair costs will be
calculated. These costs will likewise be calculated for a check of the unit if no fault
can be determined on the unit.
This regulation also applies during the warranty period.
No claims exist as to the availability of previous versions or to the retrofitting
capacity of the units delivered to adapt them to the respectively current model
version.
User conversions and changes are not Permitted
The linear actuator must not be changed in its design or in terms of safety without
our approval. Any change as defined here made by the user excludes any liability
on our part.
To Next Page
Loading...
