Parker ETH Series - Motor; Gear Assembly with Inline Motor Configuration

Parker EME
Motor/ gear assembly
192-550003N10 ETH ATEX December 2019 33
2.3.1. Motor / gear assembly with inline motor configuration
ETH032 ... ETH080
6
7
3
2
Figure 14: Motor /gear assembly ETH032 ... ETH080 inline
ETH100&125
4
E2
2
Figure 15: Motor /gear assembly ETH100 ... ETH125 inline
Dismantle motor / gearbox
 Remove motor connector.
 If you use a gearbox, we recommend to dismantle the motor from the gearbox
first for reasons of weight.
 Loosen screws (see Figure 14 Pos. 6).
 Remove motor / gearbox including mounted coupling half with caution.