42 - PVD 3674_GB_K Series_CE-November 2016.Docx
Example:
1. Hold the rotor / shaft / product assembly in a machine tool vise on the base of an
arbor press.
2. Fasten the stator assembly to the vertical moving member of the arbor press,
away from the stator.
3. Slowly lower the stator assembly around the rotor / shaft / product assembly.
4. Tighten all fasteners to complete assembly.
5. Remove Mylar shim and check for rotational clearance.
Caution : The motor has to be painted in order to evacuate the losses
as much as possible. Recommended paint : black color
Additional information can be obtained with the following link:
http://www.parkermotion.com/products/Rotary_Servo_Motors__7057__30_32_80_567_29.html
VIDEO: How to Integrate Frameless Kit Motors
To Next Page
Loading...
