Patton SmartNode SN200 - FXO Port Pinout

FXO port 50
SmartNode 200 User Manual D • Port pin-outs
FXO port
The FXO port uses an RJ-11 connector with 6 positions. The middle two positions 3 and 4 are used according
to
table 8 and figure 15.
Note Pins not listed are not used.
Note Pins not listed are not used.
Figure 15. RJ-11 pinout diagram
Table 8. RJ-11 socket
Pin Signal
3 Ring (-)
4 Tip (+)