© PCE Instruments
20
7.9 Pressure bar graph
Touch the PRESSURE BAR GRAPH section and then press + or – to toggle the bar graph time
scale between 12 hrs or 24 hrs for pressure history.
7.10 Time
1) Touch the TIME section. The + and – buttons will flash. Touch the + or – button to
adjust the contrast level between 0 and 8. (default: 5)
2) Touch the TIME section again. The + and – buttons will flash. Touch the + or – button
to set the time zone.
3) Touch the TIME section the third time. The + and – buttons will flash. Touch the + or –
button to shift between 12/24 hours format.
4) Touch the TIME section the fourth time to set the hour. The + and – buttons will flash.
Touch the + or – button to change the value.
5) Touch the TIME section the fifth time to set the minute. The + and – buttons will flash.
Touch the + or – button to change the value.
7.11 Date
1) Touch the DATE section. The + and – buttons will flash. Touch the + or – button to shift
between alarm time, date and weekday.
2) Touch the DATE section again, the + and – buttons will flash. Touch the + or – button
to shift between DD-MM format and MM-DD format for the date.
3) Touch the DATE section the third time. The + and – buttons will flash. Touch the + or –
button to set the year. Hold the + or – button for 3 s to change the number in larger
steps.
4) Touch the DATE section the fourth time. The + and – buttons will flash. Touch the + or
– button to set the month. Hold the+ or – button for 3 s to change the number in larger
steps.
5) Touch the DATE section the fifth time. The + and – buttons will flash. Touch the + or –
button to set the day. Hold the + or – button for 3 s to change the number in larger
steps.
6) Touch the DATE section the sixth time. The + and – buttons will flash. Touch the + or
– button to set the alarm hour. Hold the+ or – button for 3 s to change the number in
larger steps.
7) Touch the DATE section the seventh time. The + and – buttons will flash. Touch the +
or – button to set the alarm minute. Hold the + or – button for 3 s to change the number
in larger steps. Touch ON/OFF to enable or disable the time alarm function.
To Next Page
Loading...
Need help?
General