© PCE Instruments
24
10.3 Basic settings of the PC software
After the start-up of the “EasyWeather.exe” programme, the following window will appear on the
PC screen:
The settings from the display are transferred to the PC software. Once the settings of the display
have been completed, no settings need to be made in the PC software. However, it is easy to
change the settings in the PC software and transfer these to the display (The settings will be
updated in the display in the next full minute). When the display is connected to the PC, it shows
“USB Connected” at the bottom of the screen. If no display is connected, it shows ”USB
Unconnected”.
10.4 System menu
To Next Page
Loading...
Need help?
General