User Manual PEAK INSTRUMENTS INC
32
6.4. Data test
Remove the rear slot of the reference sample solution (the front does not move),
and placed in the sample solution is measured, and then press the [START]
button will measure a set of data, if a second sample to be measured, replace
the solution after press [START], once on.
7. Protein/DNA measurement
7.1. Function description
Protein / nucleic acid comprising two tests: Measurement of protein and single-
stranded nucleic acid testing. The curve and parameter is installed inside
instrument for the two tests and users can make tests without building standard
curve again.
To Next Page
Loading...