User Manual PEAK INSTRUMENTS INC
1
I. General Information
1. Safety notes
• Read the entire user manual carefully before you unpack, set up or operate
the device. Wrong operations could lead to serious injury of the operator or to
damage to the device.
• To make sure that the protection provided by this instrument is not impaired,
do not use or install this instrument in any manner other than that specified in
these operating instructions.
• The source lamps are operated at high temperatures. To avoid the risk of
electrocution, make sure the instrument is disconnected from the power source
before changing the lamps.
CAUTION
Health hazard caused by ozone.
Hazardous levels of ozone can be generated when the UV lamp is not cooled.
WARNING
Health hazard caused by UV light.
UV-Lig
ht can cause eye and skin damage. Protect eyes and skin from direct
exposure to UV light.
Do not look directly at an energized lamp without UV safety glasses.
CAUTION
Burn hazard, allow the lamp(s) to cool down for at least 30 minutes
are serviced/replaced.
DANGEROUS
Potential danger with contact with chemical/biological substances.
Working with chemical samples, standards and reagents can be dangerous.
Make yourself familiar with the necessary safety procedures and the
handling of the chemicals before use and read and follow all
data sheets.
Normal operation of this device may require the use of chemicals or samples
that are biologically unsafe.
• Observe all cautionary information printed on the original solution containers
and safety data sheets prior to their use.
• Dispose of all consumed solutions in accordance with the local and national
regulations and laws.
• Select the type of protective equipment suitable to the concentration and
To Next Page
Loading...
Need help?
General