User Manual PEAK INSTRUMENTS INC
36
through the numeric keys currently selected content. Press Enter to confirm
your entry, press Esc to abandon input.
Note: Time and date will not power down lost after the instrument is switched off.
8.4. Light source management
Of deuterium lamps and tungsten light source light switches to control the
display of each light source life.
Up and down keys to select the source, press Enter to confirm the selection, the
arrow keys to select the state of the light source, and press Enter to confirm the
selection,
Note: Open deuterium lamp need preheating after 15 seconds, before they can
open
To Next Page
Loading...
Need help?
General