Lubrication Schedule
Excess or spilled lubricants can cause package damage. Spilled
lubricants must be cleaned up to prevent slips or falls by
personnel which may result in serious injury. Over-lubricating is
harmful to most parts.
Use low pressure hand-guns and discretion for any part
containing grease seals (e.g., pillow blocks). Excessive grease
and/or pressure can "blow" grease seals.
CAUTION!
Always follow the vendor’s instructions for the safe handling of the
lubricants.
Frequency Location
Lubrication Type/
Special Instructions
Daily
Linear Pillow Block Ball Bearing in
Pickoff Arm
Check Daily, grease as necessary.
Lubricate the bearing with Mobilith
AW 2, Mobilith SHC 220 (or
equivalent).
Zerk fittings in bearing
Operations Manual CE35-T Case Erector
M-CE35T-2c Horiz Mag 3/2/2010
Preventive Maintenance
89
Fig. 81: Zerk fitting for Linear Bearing
Zerk Fitting
To Next Page
Loading...