How to Adjust The Magazine Advance Sensors …
1. When the Cycle Start/Stop button is pressed, the pick-off magazine ad vance
cyl in der ad vances two times for ev ery cy cle of the ma chine and will ad vance
on the pull out of a blank and dur ing the drop off of the blank.
2. The load magazine ad vance cyl in der will ad vance when both sensors (PE3 -
Pick off Magazine Full & PE2 - Load Magazine Full) do not de tect blank.
When ei ther sensor de tects a blank, the load magazine ad vance is shut down.
Operations Manual CE35-T Case Erector
M-CE35T-2c Horiz Mag 3/2/2010
How To
111
Fig. 86: Magazine Advance Sensors
Pickoff Magazine Full (PE3)
Load Magazine Full (PE2)
Pickoff Magazine Advance Cylinder
Note: Load Magazine
Advance Cylinder not shown
To Next Page
Loading...