Pearson CE35-T Case - Page 24

In This Chapter ..................................33
Machine Controls.................................34
Running the Machine...............................35
Machine Startup .................................37
Performance Checks ...............................38
Machine Shutdown ................................39
Product Clean Out ................................40
Changeover Procedures .....................43
In This Chapter ..................................43
Setup Arm E-Stop/Machine Jam Safety .....................44
Machine Constants ................................45
Machine Adjustments ..............................46
Extended Magazine................................51
Human-Machine Interface (HMI) .................67
In This Chapter ..................................67
Electronic Operator Interface...........................67
HMI Display Screens...............................68
Preventive Maintenance .....................85
In This Chapter ..................................85
Cleaning Requirements and Precautions .....................85
Prevention of Early Oxidation ..........................86
Maintenance of Areas Displaying Early Oxidation ...............86
Equipment Maintenance Schedule ........................87
Lubrication Schedule ...............................89
Troubleshooting .........................93
In This Chapter ..................................93
How To ..............................101
How to thread the Tape Head … ........................101
How To Adjust the Tape Holder or Mandrel Hub Brake … ..........102
CE35-T Case Erector Operations Manual
3/2/2010 M-CE35T-2c Horiz Mag
stnetnoC fo elbaT
8