Pendulum CNT-90 - Arming Subsystem

Command Reference 8-5
[ :LAYer [ 1 ] ]
:SLOPe
8
POSitive | NEGative
:SOURce
8
EXTernal1 | EXTernal2 | EXTernal4 | TIMer | IMMediate
:TIMer
8
<Numeric value> | MIN | MAX
* The INFinity parameter is only accepted by the CNT-91
Arming Subsystem
:ARM
[ :STARt | :SEQuence [ 1 ] ]
:LAYer2
:[ IMMediate ]
:SOURce
8
BUS | IMMediate
[ :LAYer [ 1 ] ]
:COUNt
8
<Numeric value> | MIN | MAX | INF *
:DELay
8
<Numeric value> | MIN | MAX
:SLOPe
8
POSitive | NEGative
:SOURce
8
EXTernal1 | EXTernal2 | External4 | IMMediate
:STOP | :SEQuence2