8-115 Command Reference
:SYSTem :LANGuage
8 NATive | COMPatible
Select GPIB Mode
The user can select between two command sets, where native exploits the full
capability of the instrument, and compatible facilitates portability to test systems
using the Agilent counters 53131 and 53132.
The command set described in this manual refers to the native mode only.
:SYSTem: INSTRument: TBASe: LOCK?CNT-91R
Check Rubidium Oscillator Status
Query command returning the status of the rubidium oscillator control loop.
Returned format:> <Numeric value>¿
A “1” means “locked”
A “0” means “unlocked”.
To Next Page
Loading...
