Pendulum CNT-90 Programmer's Handbook

8-32 Command Reference
:DISPlay :ENABle
8 < Boolean >
Display State
Turns On/Off the updating of the entire display section. This can be used for secu
-
rity reasons or to improve the GPIB speed, since the display does not need to be
updated.
Parameters: <Boolean> = (1 / ON | 0 / OFF)
Returned format: 1|0 ¿
*RST condition: ON
Complies with standards: SCPI 1991.0, confirmed.

Pendulum CNT-90 Specifications

General

Brand	Pendulum
Model	CNT-90
Category	Measuring Instruments
Language	English