SGM700 Digitizer
Configuration Menu -Eth- -continue-
In gAt 1 you set the first first numbers of the Gateway address you want to
give the SGM700 (example: 192.168.001.001). Use key 1 and key 2 to change
the number Key 1 is for changing the number (1-9), key 2 is for changing the po-
sition of the cursor. Confirm by pressing key 3 >2 sec.
Increase Decrease Left Right Confirm
When confirmed the following screen will be visible:
In gAt 2 you set the second three numbers of the Gateway address you want
to give the SGM700 (example: 192.168.001.001). Use key 1 and key 2 to change
the number Key 1 is for changing the number (1-9), key 2 is for changing the po-
sition of the cursor. Confirm by pressing key 3 >2 sec.
Increase Decrease Left Right Confirm
When confirmed the following screen will be visible:
In gAt 3 you set the third three numbers of the Gateway address you want to
give the SGM700 (example: 192.168.001.001). Use key 1 and key 2 to change
the number Key 1 is for changing the number (1-9), key 2 is for changing the po-
sition of the cursor. Confirm by pressing key 3 >2 sec.
Increase Decrease Left Right Confirm
37
To Next Page
Loading...
