Pentair AUTOTROL 368 - Motor and Camshaft Replacement

Installer manual Autotrol 368 (604-606) - Maintenance
Ref. MKT-IM-007 / D - 09.10.2020 49 / 60
9.4.6 Motor and camshaft replacement
1. Turn the locking clip(3) on the left to unlock the controller(2).
2. Remove the controller(2) from the valve body(1).
Caution - material
Be careful with cables connections when disassembling the controller(2).
3. Loosen the screws(6) and remove the clamp(5).
4. Remove and disassemble the camshaft(7) from the motor(4).
5. Reverse above procedure steps to rebuild.