Pentair AUTOTROL 368 - Volumetric Regeneration (606 only); Calendar Override Setting (606 only); History; Operation Recommendations

Installer manual Autotrol 368 (604-606) - Generalities
Ref. MKT-IM-007 / D - 09.10.2020 7 / 60
1.5.2 Available certificates
• CE;
• DM174;
• ACS.
Please find beside the certifications for some of our
product families. Please note that this list is not an
exhaustive list of all our certifications. In case of need
for more information please contact us.
1.6 Procedure for technical support
Procedure to follow for any technical support request:
1. Collect the required information for a technical assistance request.
ð Product identification (see Serial label location [
→
Page10] and Recommendations
[
→
Page41]);
ð Description of the device problem.
2. Please refer to the Troubleshooting [
→
Page54]. If the problem persists contact your
supplier.
1.7 Copyright and Trademarks
All indicated Pentair trademarks and logos are property of Pentair. Third party registered and
unregistered trademarks and logos are the property of their respective owners.
© 2020 Pentair. All rights reserved.
1.8 Limitation of liability
Pentair Quality System EMEA products benefit, under specific conditions, from a manufacturer
warranty that may be invoked by Pentair’s direct customers. Users should contact the vendor of
this product for applicable conditions and in case of a potential warranty claim.
Any warranty provided by Pentair regarding the product will become invalid in case of:
• installation done by a non-water-professional;
• improper installation, improper programming, improper use, improper operation and/or
maintenance leading to any kind of product damages;
• improper or unauthorized intervention on the controller or components;
• incorrect, improper or wrong connection/assembly of systems or products with this product
and vice versa;
• use of a non-compatible lubricant, grease or chemicals of any type and not listed by the
manufacturer as compatible for the product;
• failure due to wrong configuration and/or sizing.
Pentair accepts no liability for equipment installed by the user upstream or downstream of Pentair
products, as well as for process/production processes which are installed and connected around
or even related to the installation. Disturbances, failures, direct or indirect damages that are
caused by such equipment or processes are also excluded from the warranty. Pentair shall not
accept any liability for any loss or damage to profits, revenues, use, production, or contracts, or
for any indirect, special or consequential loss or damage whatsoever. Please refer to the Pentair
List Price for more information about terms and conditions applicable to this product.