Pentair Fleck 4600-MECH - Set the Number of Days between Two Regenerations

Installer Manual Fleck 4600 - MECH - Programming
Ref. MKT-IM-027 / B - 01.06.2018 49 / 88
6.3.2. Set the number of days between two regenerations
No. Operation
A Push the pins (1) out to set up.
Note
There are two time clock wheels:
• 7 days: based on the week, number 1 will refer to Monday, number 7 to Sunday;
• 12 days: allows to set a regular interval every 2, 3, 4 or 6 days.
Note
Example for the following drawing, the regeneration will occurs on Monday and Thursday.