Pentair Fleck 4600-MECH - Abbreviations Used; Norms; Applicable Norms

Installer Manual Fleck 4600 - MECH - Generalities
8 / 88 Ref. MKT-IM-027 / B - 01.06.2018
1.5. Abbreviations used
Assy......................................................... Assembly
BLFC ....................................................... Brine Line Flow Controller
BV............................................................ Brine Valve
CW........................................................... Cold Water
DF............................................................ Down Flow
Distr ........................................................ Distribution
DLFC ....................................................... Drain Line Flow Controller
FR............................................................ Fast Regeneration
HW........................................................... Hot Water
Imm......................................................... Immediate
Inj ............................................................ Injector
N/A .......................................................... Not Available
PN ........................................................... Part Number
Regen...................................................... Regeneration
S&S ......................................................... Seals & Spacers
SBV.......................................................... Safety Brine Valve
STD.......................................................... Standard
Sys........................................................... System
VB............................................................ Valve Body
1.6. Norms
1.6.1. Applicable norms
Comply with the following guidelines:
• 2006/42/EC: Machinery Directive;
• 2014/35/UE: Low Voltage Directive;
• 2014/30/UE: Electromagnetic Compatibility;
• 2011/65/CE: Restriction of use of certain Hazardous Substances in electrical and electronic
equipment (RoHS);
• UNI EN ISO9001 (certificate no. 95.022 SSG ICS).
Meets the following technical standards:
• EN 55014-1;
• EN 55014-2;
• EN 61000-6-1;
• EN 61000-6-2;
• EN 61000-6-3;
• EN 61000-6-4;
• EN 61010-1.