Installer Manual Fleck 4600 - MECH - Maintenance
62 / 88 Ref. MKT-IM-027 / B - 01.06.2018
9.2.4. Controller motor replacement
9.2.5. Brine cam assembly replacement
No. Operation
A Using a flat screwdriver, unscrew (4) and remove the cover (3).
B Disconnect the motor (1).
C Using a Phillips screwdriver, unscrew (2) and remove the motor (1).
D Change the motor (1).
E Reverse above procedure steps to rebuild.
No. Operation
A Remove the power head, see“Piston and/or brine valve replacement”, page 58.
B Using a flat screwdriver, unscrew (1).
C Remove the washer (2) and the brine cam (3).
D Change the brine cam (3).
E Reverse above procedure steps to rebuild.
To Next Page
Loading...
