Installer Manual Fleck 4600 - MECH - Maintenance
60 / 88 Ref. MKT-IM-027 / B - 01.06.2018
9.2.3. Seals and spacers cartridge replacement
Caution
Use only approved silicone grease or soapy water.
9.2.3.1 Special tools needed
No. Operation
A Remove the piston, see“Piston and/or brine valve replacement”, page 58.
B Using a small hook, remove a seal (3).
C Using the puller (1), remove a spacer (4).
D Repeat B and C for all the seals and spacers.
E Lubricate all seals (3) with approved lubricant only.
F Put back a new seal (3) using the stuffer (2).
G Put back a spacer (4) using the stuffer (2).
H Repeat F and G for all the seals and spacers.
I Rebuilt the piston, see“Piston and/or brine valve replacement”, page 58.
Item Part number Description
Packaging
quantity
1 13061 Puller 1
2 12763 Stuffer 1
To Next Page
Loading...
