Pentair Fleck 4600-MECH - Injector cleaning

Installer Manual Fleck 4600 - MECH - Maintenance
64 / 88 Ref. MKT-IM-027 / B - 01.06.2018
9.2.7. Injector cleaning
No. Operation
A Using a flat screwdriver or a 8 mm wrench, remove the screws (6).
B Remove the cap injector (5).
C Remove the seal (4).
D Remove the filter (2).
E Using a flat screwdriver, remove the injector nozzle (3).
F Using a flat screwdriver, remove the injector throat (1).
G Clean or change the injector throat (1), the injector nozzle (3), the filter (2) and the seal (4).
H Lubricate all seals with approved lubricant only.
I Reverse above procedure steps to rebuild.