HAFFMANS c-DGM/i-DGM
c-DGM/i-DGM Page 19 of 78
5. Installation
5.1 Contents of the delivery
The o-DGM has been calibrated, checked and tested by Haffmans BV before delivery so that it
is ready for immediate use. It is not necessary to calibrate the instrument.
Make sure the delivery is complete and undamaged.
If the delivery is incomplete or damaged, immediately notify Haffmans B.V. or the
representative/agent designated by Haffmans B.V. The serial number, the order number or the
invoice number for the o-DGM (as issued by Haffmans BV) must be stated in all
correspondence.
Attention!
Before beginning any operations with the product you must be
certain that the instrument is complete and that there are no
missing components.
Upon delivery, the product includes the following:
- c-DGM or i-DGM,
- Service set (with tools, replacement parts, and a wide range of voltage adapters),
- Hose set,
- PC communication program “DGM utility” on a CD-ROM,
- RS-232 communication cable (1.5 meters),
- User manual.
Optional:
- Quick-charger for clients who wish to charge the battery pack quickly. The battery pack
must be disconnected from the DGM while it is being charged.
- 2x ID keys for users,
- 2x ID keys for places.
To Next Page
Loading...