HAFFMANS c-DGM/i-DGM
Page 32 of 78 c-DGM/i-DGM
6.2 *Measurement choice
For the c-DGM you can select one of the following measurement programs from the
“Measurement choice” menu:
1) Combined CO
2
/ O
2
measurement
2) Only CO
2
measurement
3) Only O
2
measurement
4) Continuous O
2
measurement
5) Combined CO
2
/ TPO measurement
6) TPO measurement
These measurement programs are explained in more detail in the related sub-sections.
The following steps take you to the “Measurement choice” menu:
1. Press “Enter” until the Haffmans logo appears.
In addition to the software version, the display shows the serial number of the c-
DGM.
2. Press “Enter” again.
This takes you to the main menu.
3. Use the arrow buttons to select the “Measurement choice” menu and then press “Enter”
to open the menu.
4. Use the arrow buttons to select one of the measuring programs that are displayed.
To Next Page
Loading...