HAFFMANS c-DGM/i-DGM
c-DGM/i-DGM Page 75 of 78
Appendix VII Replacement parts
When you order replacement parts, we request that you provide the following information with
your order:
• Serial number of the DGM.
• Position number (from the parts list below – please compare with the drawings).
• Description
• Article number
c-DGM(Drawing No. DGM-06-3027 USA)
Pos. Description Art. no.
Instrument
ID key for user (User/Operator) 100.007
ID key for place (Location/Place) 100.010
08 Carrying handle (long) 100.129
08 Carrying handle (short) 100.056
Foil for display c-DGM 101.018
Foil for display i-DGM 100.054
07, 20 Plunger, complete 100.107
12 Throttle valve 100.042
26 Plunger block c-DGM (excl. oxygen sensor) 101.017
26 Plunger block i-DGM 100.025
06 Protective housing (plunger) 100.017
11* Battery pack c-DGM (9.6 V; 2500 mAh) 101.001
11 Battery pack i-DGM (9.6 V; 1300 mAh) 100.001
23, 24, 25,
28, 29
Set, O2 sensor, type LHO (0 to 2 ppm) up to c-DGM serial number 10437 101.005
23, 24, 25,
28, 29
Set, O2 sensor, type LHO (0 to 2 ppm) from c-DGM serial number 10438 101.014
23, 24, 25,
28, 29
Set O2 sensor type WLO (0 tot 45 ppm)
101.304
22 Screw M3x8 005.682
19 Screw M4x10 004.993
16* Screw M5x30 006.342
16 Screw M5x50 002.641
03 Schroef M6x8 for calibration connection 100.127
Set, O-rings, c-DGM 101.004
Set, O-rings, i-DGM 100.003
To Next Page
Loading...