Pentair HAFFMANS c-DGM User Manual

HAFFMANS c-DGM/i-DGM
c-DGM/i-DGM Page 77 of 78
Appendix VIII Drawings
Description Diagram number
c-DGM overview
DGM-06-3001
Key for drawing: c-DGM/01:
Pos. Description Art. no.
01 Electronics housing
02 Measurement chamber
03 Screw M6x8 for Calibration connection
04 O-ring for screw M6x8 100,048
05 Temperature sensor
06 Protective housing for plunger block
07 Plunger
08 Support bracket
09 Communication/charging connector
10 Pressure sensor
11* Battery pack c-DGM (9.6 V; 2500 mAh)
11 Battery pack i-DGM (9.6 V; 1300 mAh)
12 Throttle valve
14 O-ring (small) 100,082
15 Identification point
16* Screw M5x30
16 Screw M5x50
17 In-/outlet hose connector
*18 O-ring on in-/outlet hose connector (c-DGM) 101.040/101.042
18 O-ring on in-/outlet hose connector (i-DGM) 000.745 / 001.630
19 Screw M4x10
20 Handle
21 O-ring on plunger 000,745
22 Screw M3x8
23* O
2
sensor

Pentair HAFFMANS c-DGM Specifications

General

Brand	Pentair
Model	HAFFMANS c-DGM
Category	Measuring Instruments
Language	English