Pentair HAFFMANS c-DGM User Manual

HAFFMANS c-DGM/i-DGM
Page 6 of 78 c-DGM/i-DGM
6.2.4 Continuous *O
2
measurement 35
6.2.5 *Combined CO
2
/ TPO measurement 37
6.2.6 *TPO measurement 38
6.3 Reading the measurement results 39
6.4 Erasing measurement results 39
6.5 Product choice 39
6.6 Charging the battery 40
7. Calibration and compensation 43
7.1 Calibration of the temperature sensor 43
7.2 Calibration of the pressure 43
7.2.1 Calibration instructions 44
7.3 Compensation 46
7.3.1 General 46
7.3.2 Compensation instructions 46
7.4 *Calibration O
2
sensor 47
7.4.1 *Calibration frequency 47
7.4.2 *One point calibration 48
7.4.3 *Calibration with two gases 48
8. Cleaning and maintenance 53
8.1 Daily cleaning 53
8.2 Monthly maintenance 53
9. Faults and repair 57
9.1 Fault list 57
9.2 Replacing the battery pack 58
9.3 *Replacing the O
2
sensor 59
10. Decommissioning, storage and transport 61
10.1 Decommissioning 61
10.2 Storage 61
10.3 Transport 61
Appendix I Formulas 63
Appendix II *Software structure of c-DGM 65
Appendix III Software structure of i-DGM 67
Appendix IV Client service 69
Appendix V Warranty conditions 71
Appendix VI EC Declaration of conformity 73
Appendix VII Replacement parts 75
Appendix VIII Drawings 77

Pentair HAFFMANS c-DGM Specifications

General

Brand	Pentair
Model	HAFFMANS c-DGM
Category	Measuring Instruments
Language	English