Pentair INTELLICENTER Quick Reference Guide

IntelliCenter Control System Quick Reference Guide
10
Groups (Circuit/Light) (Settings)
The Groups feature allows multiple circuits to be grouped together and assigned to one ON/OFF button that is displayed on the Home screen Features Groups screen. Note: Groups of circuits can be
selected from the CIRCUITS, and LIGHTS.
+Add Group (Circuits): Tap Add Group, and select Circuit Group, and enter a name for the selected Circuit Group. Tap Check to save the Circuit Group name and continue to the Circuit Group Settings
screen. Tap the group name from the Groups list.
Delete Groups: Tap the Trash icon; check the desired Circuits or Light Group to delete. Tap Yes to delete.
Nested Groups: If necessary, it is possible to create a Group of circuits within another Group of circuits, as long as they are from the same group (Light, or Circuit).
Note: Circuits grouped together can be switched ON/OFF from one button in the Features (Circuits), Lights (circuits) on the Home screen.
Light or Circuit Group Settings:
Group Name: Tap the name bar to access the keyboard screen. Enter a name for the groups of circuits.
Included Lights (or Circuits): Tap the Included Circuits number bar to access the available AUX circuits. The AUX circuits displayed depend on the model of the Personality Card installed. AUX circuits
are assigned in the AUX circuits screen. For more information, see, Advanced System Configuration > Installation Setup > Circuits > AUX Circuit - OCP 0 or Feature Circuits.
Egg Timer: Egg Timer: Tap the button and set the timer from 0 to 12 hours.
Don't Stop: Tap the Hours Up button until 23 Hours displays, tap once again to display DO NOT STOP. Once the circuit is switched on, it will remain on until it is manually switched off.
Note: The Egg Time sets a specified time delay (hrs/mins) for the circuit to function once it is turned on.
Swim Settings (Lights only): Tap the Swim Settings button and adjust the delay between each light from 0 to 59 seconds.
This feature synchronizes any IntelliBrite
®
or Landscape color lights.
The color swim effect starts from the first light, then the color change is delayed across to the adjacent lights creating a wave delay effect. For more information about light features, see
Circuit Type in Advanced System configuration > Installation Setup > AUX Circuits > AUX Settings (Circuit Type).
AUX Circuits and Feature Circuits (Continued)

Pentair INTELLICENTER Specifications

General

Expandable	Yes
Energy Management	Yes
Touchscreen Display	Yes
Remote Access	Yes, via Mobile App
User Interface	Touchscreen
Remote Monitoring	Yes
Number of Circuits	Up to 40
Wireless Connectivity	Yes
Power Requirements	120V AC
Enclosure Rating	NEMA 3R