IntelliCenter Control System Quick Reference Guide
5
Features (Individual/Groups Circuits)
Up to 32 individual or Groups of Feature Circuits can be assigned as a Generic circuit or a Spillway circuit. Tap Features on the Home screen to display the Feature circuits screen. From
the Features screen you can manually turn on or off an individual Feature circuit or a group of Features circuits. To assign Feature Circuits, see Settings > Advanced System Configuration
> Installation Setup > Circuits > Feature Circuits .
Features Individual/Groups: From the Features screen you can manually turn on or off individual or Groups of lights or individual circuits for pool devices.
Lights and auxiliary circuits (equipment) displayed are configured from Settings > Advanced System Configuration > Installation Setup > Circuits > Feature
Circuits. Tap Return Arrow to return to the Home screen.
Tap Individual or Groups to display the available feature or group of circuits to switch on or off.
Example: Set different pump speed using IntelliFlo
®
pump: To manually control different pump speeds, assign each feature circuit a different pump speed.
Note: Functions for circuits GROUPS are assigned in Settings >
Advanced System Configuration > Installation Setup > Circuits.
Feature Circuit (Generic or Spillway): Tap on Circuit Type (function) and select either Generic of Spillway.
Note: Assign the Feature Circuit Name, Visible in Features, Egg Timer (12 Hr. Default), Don't Stop (Continuous) and Freeze Protection.
Home screen Features Green Badge: Displays the number of active feature circuits. To display circuits in the Features screen, see Settings > Advanced System Configuration > Installation Setup >
Circuits > Feature Circuits > Feature Circuit Settings (Visible in Features (Y/N) option).
To Next Page
Loading...
Need help?
General
