PEP Modular Computers VMP2 - Page 102

NetBootLoader VMP2
Page 5 - 28 © 2002 PEP Modular Computers GmbH ID 24855, Rev. 02
PUT
FUNCTION: Upload contents of the data buffer to the ftp server.
SYNTAX:
put <filename>
where:
put command
<filename> parameter: string
file name to be used for contents of data buffer to
be uploaded
DESCRIPTION: To upload the contents of the data buffer to a file on an ftp server, the
command “put” is used. The file indicated by the parameter
“<filename>” is created on the server. In the event that a file with this
name already exists, its contents will be overwritten.
PWD
FUNCTION: Display the current ftp server directory.
SYNTAX:
pwd
DESCRIPTION: If a ftp connection has been established with the “login” command,
the command “pwd” is used to display the complete path of the
current directory on the ftp server.
RS
FUNCTION: Reset the system
SYNTAX:
rs
StockCheck.com