PEP Modular Computers VMP2 - Software Compatibility ID

VMP2 Configuration
ID 24855, Rev. 02 Page 4 - 11© 2002 PEP Modular Computers GmbH
4.3.4.3 Software Compatibility ID
The Software Compatibility ID will signal to the software when differences in hardware
require different handling by the software. This register is READ ONLY. It starts with the
value 0x00 and will be incremented with each change in hardware (software sensitive
only).
Table 4-8: Software Compatibility ID
REGISTER NAME
SOFTWARE COMPATIBILITY ID
ACCESS
ADDRESS
0xFFE0 0012 R
BIT POSITION
MSB
7 6 5 4 3 2 1 0
LSB
CONTENT
SC7 SC6 SC5 SC4 SC3 SC2 SC1 SC0
DEFAULT
n/a n/a n/a n/a n/a n/a n/a n/a
StockCheck.com