PEP Modular Computers VMP2 - 1.4 Applied Standards; 1.5 Related Publications

VMP2 Introduction
ID 24855, Rev. 02Page 1 - 8 © 2002 PEP Modular Computers GmbH
1.4 Applied Standards
1.4.1 CE Compliance
The PEP Modular Computers’ VME systems comply with the requirements of the follow-
ing CE-relevant standards:
• Emission EN50081-1
• Immission EN50082-2
• Electrical Safety EN60950
1.4.2 Mechanical Compliance
• Mechanical Dimensions IEEE 1101.10
1.4.3 Environmental Tests
• Vibration IEC68-2-6
Random Vibration, Broadband IEC68-2-64 (3U boards)
• Permanent Shock IEC68-2-29
• Single Shock IEC68-2-27
1.5 Related Publications
1.5.1 VME Systems/Boards
VME Specification, ANSI/VITA 1-1994 for VME, approved April 10, 1995
1.5.2 PMC Add-on Modules/Carriers
• Draft Standard for a Common Mezzanine Card Family, P1386/Draft 2.0
• Draft Standard Physical and Environment Layers for PCI Mezzanine Cards,
P1386.1/Draft 2.0
StockCheck.com