PEP Modular Computers VMP2 - Page 93

VMP2 NetBootLoader
ID 24855, Rev. 02 © 2002 PEP Modular Computers GmbH Page 5 - 19
LF
FUNCTION: Load Flash
SYNTAX:
lf [-o[=]<offset> [-k]]
… [-m[=]<adr> -l[=]<len>]
where:
lf command
-o option: offset
<offset> parameter: value: hexadecimal
program to FLASH offset of ...
-k option: keep
retain surrounding contents
-m option: memory (address)
<adr> parameter: value: hexadecimal
absolute address of image to be programmed
-l option: length
<len> parameter: value: hexadecimal
length of image to be programmed
DESCRIPTION: Without parameters, the FLASH is programmed using the contents of
the data buffer. If no image is available in the data buffer, the FLASH
programming is terminated.
StockCheck.com