K23-SSI/USB/25B-C | OPERATING SOFTWARE OS6.0
46
4.9 Linearization Menu
This menu defines the linearization points.
For a description and examples of the linearization function, see Appendix.
P1(X) … P24(X)
X coordinate of the linearization points.
This is the value that the device would generate without linearization on the basis
of the input signal.
P1(Y) … P24(Y)
Y coordinate of the linearization points.
This is the value that the device should generate instead of the x coordinate.
For example: P2(X) is replaced by P2(Y).