K23-SSI/USB/25B-C | OPERATING SOFTWARE OS6.0
38
STANDSTILL TIME(s)
This parameter defines the downtime. When downtime is detected, a downtime
signal is signaled after xx.xx seconds.
AVERAGE FILTER—SPEED (filter for average determination)
Switchable average determination for preventing velocity fluctuations.
Flowing average determination with two cycles
Flowing average determination with four cycles
Flowing average determination with eight cycles
Flowing average determination with 16 cycles
4.6 Serial Menu
The default settings for the serial interface are defined in this menu.
UNIT NUMBER
This parameter can be used to set serial device addresses. The devices can be
assigned addresses between 11 and 99. Addresses that contain a "0" are not
allowed since these are used as group or collective addresses.
Smallest address without zero
Device address is fixed to "11" for USB interface and cannot be adjusted
Shortest delay time in seconds
Longest delay time in seconds
To Next Page
Loading...
Need help?
General
