Pepwave AP One Series - System SNMP Configuration

http://www.pepwave.com 23 Copyright © 5/23/16 Pepwave
User Manual
PEPWAVE AP Series
7.1.5 SNMP
SNMP, or simple network management protocol, is an open standard that can be used to collect
information about your access point. The SNMP section offers a range of settings to control simple
network management protocol access.
SNMP Settings
SNMP Device
Name
This field shows the AP name defined at System>Admin Security.
SNMP Port
This option specifies the port which SNMP will use. The default port is 161.
SNMPv1
This option allows you to enable SNMP version 1.
SNMPv2c
This option allows you to enable SNMP version 2c.
SNMPv3
This option allows you to enable SNMP version 3.