Name: Pepwave AP One Series
Brand: Pepwave
Rating: 5 (1 reviews)

To Next Page

To Previous Page

User Manual

PEPWAVE AP Series

Choose v1 or v2 of the 802.1x EAPOL. When v1 is selected, both v1 and v2 clients can

802.1X Version associate with the access point. When v2 is selected, only v2 clients can associate with the

access point. Most modern wireless clients support v2. For stations that do not support v2,

select v1. The default is v2.

WEP Key Size Select 40 bits (64-bit WEP) or 104 bits (128-bit WEP).

This option specifies the length of time throughout which the broadcast key remains

Re-keying Period valid. When the re-keying period expires, the broadcast key is no longer valid and broadcast key

renewal is required. The default is 14400 seconds (four hours). 0 disables re-keying.

WPA/WPA2 – Personal

Passphrase

Enter a passphrase of between 8 and 63 alphanumeric characters to create a passphrase used

for data encryption and authentication. Click Hide / Show Passphrase to toggle visibility.

WPA/WPA2 – Enterprise

802.1X Version

Choose v1 or v2 of the 802.1x EAPOL. When v1 is selected, both v1 and v2 clients can associate

with the access point. When v2 is selected, only v2 clients can associate with the access point.

Most modern wireless clients support v2. For stations that do not support v2, select v1. The

default is v2.

Questions and Answers:

Need help?

Do you have a question about the Pepwave AP One Series and is the answer not in the manual?

Pepwave AP One Series Specifications

General