Pepwave AP One Series User Manual

http://www.pepwave.com 32 Copyright © 5/23/16 Pepwave
User Manual
PEPWAVE AP Series
Web Portal Login
Web Portal Select Enable to turn on your access point’s built-in web portal functionality.
Authentication Choose Open Access to allow users to connect without authentication or RADIUS to Method
require authentication. If RADIUS is selected, you’ll be given the opportunity to select a RADIUS security method in
the next field.
RADIUS Security Select PAP, EAP-TTLS PAP, EAP-TTLS MSCHAPv2, or PEAPv0 EAP-MSCHAPv2.
Splash Page If your web portal will use a splash page, choose HTTP or HTTPS and enter the splash page’s URL.
Landing Page If your web portal will use a landing page, check this box.
Landing Page
URL If you have checked Landing Page, enter your landing page’s URL here.
Concurrent Login Check this box to allow users to have more than one logged in session active at a time.

Pepwave AP One Series Specifications

General

Wi-Fi Standards	802.11a/b/g/n/ac
Frequency Bands	2.4 GHz, 5 GHz
Ethernet Ports	2 x Gigabit Ethernet
Security	WPA3, WPA2, WEP
Antennas	Internal antennas
Mounting	Wall or ceiling mount
Power over Ethernet (PoE)	802.3af/at