Pepwave AP One Series - Page 34

http://www.pepwave.com 34 Copyright © 5/23/16 Pepwave
User Manual
PEPWAVE AP Series
RADIUS Server Settings
Host
Enter the IP address of the primary RADIUS server and, if applicable, the secondary RADIUS
server.
Secret
Enter the RADIUS shared secret for the primary server and, if applicable, the secondary RADIUS
server.
Authentication
Port
Enter the UDP authentication port(s) used by your RADIUS server(s) or click the Default button
to enter 1812.
Accounting Port
Enter the UDP accounting port(s) used by your RADIUS server(s) or click the Default button to
enter 1813.
Maximum
Retransmission
Enter the maximum number of allowed retransmissions.
RADIUS Request
Interval
Enter a value in seconds to limit RADIUS request frequency. Note the initial value will double on
each retransmission.